Recent Commercial Posts
Protect Your Business: Learn These 3 Facts About Ceiling Mold
Black mold is dangerous and it can turn into a major problem for your commercial property.
Protecting your South Oceanside, CA, commercial property is likely a priority for you, no matter your business niche. However, there are some dangers that can develop out of sight and turn into a major problem before you can spot them, such as black mold growth. This fungus and others like it can cause serious damage to multiple building materials, but knowing a few facts about how to find and eliminate them may help you to better defend your building.
1. Humidity Encourages Growth
Moisture and humidity are two of the major causes behind ceiling mold. Once mold spores in the air find this type of environment, they latch on, eat and start to spread. Spores from new growth can then spread to other areas of the ceiling. If your area sees humid summers or plenty of rain, consider installing ceiling fans in each area to keep humidity levels low.
2. Leaks Can Attract Mold
Even a small ceiling leak can attract mold spores. It is wise to monitor each floor of your building, especially the attic, after a downpour or during a few consecutive days of wet weather. If you discover that a roof leak is causing the problem, you can lower the risk of mold growth by using a temporary tarp to keep moisture out until your roofing contractor arrives to make repairs.
3. Stains Can Alert You to Leaks
Black mold and other fungi can grow quickly once your ceiling begins to leak, but it may not always be visible. However, sudden and mysterious stains on your ceiling can alert you to a problem, especially if the mold is growing on the underside of the ceiling material. Connecting with a mold damage and removal company can help you resolve this issue and prevent serious problems with your ceiling.
Your South Oceanside, CA, commercial building can come under attack by black mold and other types of damaging fungi during wet weather. Checking your ceilings for leaks and being aware of how mold forms may help you prevent fungi from getting a foothold on your business.
5 Steps for Drying Out a Water-Damaged Building
When it comes to water damage, nothing is more important than acting quickly and calmly. These five practical water damage tips can help protect your belongings and commercial property in South Oceanside,CA, from damage, or hold you over until water damage restoration specialists arrive.
1. Document All Damage
Immediately get photographic evidence of all the damage throughout the building. Try to identify the source of the leak, such as a pipe burst. Whatever the cause, documentation can save you time and stress when negotiating coverage with your insurance company.
2. Circulate Air
Of these damage tips, the most time-sensitive may be the use of air circulation to stave off further damage or warping. Buy or rent high-powered industrial fans to powerfully blow air. Open closet or cupboard doors to provide airflow. Depending on the humidity outside, crack open windows and vents. Large industrial dehumidifiers are also recommended to remove moisture from the air.
3. Remove Wet Items and Water
Remove wet flooring, furniture and other fixtures, as these only add to the moisture level. Keep in mind that household vacuums generally aren’t designed for water. Use an industrial wet/dry vacuum to absorb lingering water or mud.
Since the floodwater could contain waste and sewage, it should be cleaned up as soon as possible. Use warm, fresh, soapy water to clean floors, walls, or any other fixtures that have touched standing water. Don’t neglect ductwork; sanitize any ducts that were filled with water. These cleaning tips can help ensure that surfaces are safe for use.
5. Absorb Remaining Moisture
While fans and dehumidifiers are circulating and drying the air, you can tackle remaining moisture with desiccants, which are tubs of absorbent silica gel, clay or calcium oxide. Desiccants come in an array of sizes; visit your local supermarket or hardware store to find the size and formulation that’s right for you.
Discovering flooding or a pipe burst on your property can be overwhelming. By thinking quickly, staying calm and following these water damage tips, you’re sure to be standing on dry ground in no time!
What To Expect From Your Commercial Generator
Commercial generator in Fallbrook,CA
When you are trying to choose a generator for your commercial property in Fallbrook,CA, there are a few key factors to consider. How many hours should it run? What kind of fuel should it use? Do you need it to keep running overnight? The answers to these questions can help guide you to the machine that best meets your needs.
1. How long can it run?
Many generator problems manifest in the limited amount of time they can run. Ideally, the one you choose will run as long as there is a power supply to keep it going. If you have a continuous power source, you don't have to worry about this as much. If, however, the tank has to be refilled periodically, it is a good idea to conserve energy by only running the generator when absolutely necessary. This is especially true during an extended outage.
2. How is it fueled?
The fuel used to power the standby can affect not only the number of hours it can run continuously but also its reliability. Many commercial machines are powered by natural gas supplied by the local utility company through gas lines, so they can run without interruption. If there is a diesel or propane tank attached, however, you must depend on the reliability of your service providers to make sure they can refuel regularly. While more expensive, diesel models tend to be the most reliable.
3. How often do you need it?
An engine with 3600 RPM is less expensive, but it must be turned off periodically so that it doesn't overheat. If you live in a temperate climate and your building does not need power when no one is there, this may be an acceptable option. If, however, you are concerned that going without power all night could cause pipes to freeze and cost you more in water remediation repairs, go with the 1800 RPM engine.
Choosing a generator is a matter of deciding what you need. By answering these three questions, you can find the machine that meets your expectations.
Could a Water Leak Be Costing You Thousands: Six Common Leaks That Can Lead to Big Costs
Leaky faucets can cause you a problem in Bonsall, CA
While water damage is a concern of any water leak, the cost associated with a consistent leak can be more expensive than the repair itself; therefore, it is vital to inspect the six areas below before they become significant issues.
1. Leaky Faucets
Even though that leaky faucet in the break room may not be bothering anybody, that small drip can be causing the loss of up to 20 gallons per day. If you have a leaky faucet, you may be able to fix it by just replacing the washer.
2. Faulty Disposals
Another typical leak occurs in the lunchroom kitchen under the sink. The garbage disposal may have worn gaskets that are leading to several small leaks or drips. You may find it difficult to tell if your disposal is leaking because most often the leak is on the inside.
If only one restroom has one leaky toilet, you can be wasting up to 73,000 gallons per year, and this converts to a loss of hundreds if not thousands of dollars, depending on the severity of the water leak. Again, replacing flanges and gaskets may be all that is required to fix this problem.
4. Water Heaters
As one appliance that is typically ignored on a daily basis, a water heater could potentially leak for months without being noticed. A water heater leak can lead to the growth of mildew as well as damaged floors and walls.
5. Outside spigots
Another potential leaking hazard that is easy to forget about are exterior spigots. Like faucets, a leaky spigot can lead to extensive water loss, but even worse, it can lead to foundational issues.
6. A Pipe Break
While all the other common sources of leaks are easily inspected, a pipe break will most likely need to be investigated by a plumbing specialist in Bonsall,CA. A good idea is to have annual inspections and sewer cleanings to lower the risk of any extensive damage.
While a water leak can lead to extensive damage, it may be one of the easiest disasters to prevent. Routine inspections and quick action may end up saving your company thousands.
Effective Ways To Inform Employees About Mold Containment
Many employers are not sure how or whether to inform employees that the company will be undergoing mold removal. When talking about mold growth and removal, business owners can feel out of their depth. But "mold" doesn't have to become a four-letter word in South Oceanside, CA. Your employees' perception of safety depends upon whether you provide transparency during the containment process. Communication can prove more beneficial than leaving your team in the dark. You can do this. Here's how:
1. Anticipate Employee Concerns
Most of your staff is probably familiar with media hype surrounding black mold. In fact, the color of mold is not a true indicator of type. A good mold remediation specialist can brief you on general questions people have about mold removal and containment. Armed with the facts, you can address concerns and reassure your workers that their safety is your top priority.
2. Provide Employee Education on Mold Containment
Mold containment is generally necessary to stop mold from spreading. It may involve sealing off an area with plastics, shutting down HVAC or other systems that spread mold via air circulation, or even constructing airtight negative pressure chambers. By understanding how mold containment works, employees will often see the positives and understand the process.
3. Keep Employees in the Loop
Periodically issue updates about the changes your employees will see in their work areas as the containment process gets underway. Informal meetings or e-mails can help keep staff concerns to a minimum.
4. Designate a Contact Person
Name a point person in your organization. Make it clear that employees can contact this individual with any questions they may have as containment proceeds.
Take the time to address employee concerns, educate workers about mold removal and issue progress updates. If you do so, your employees will likely feel confident that their safety and their ability to work effectively will not be compromised. Visit http://www.SERVPROfallbrooksouthoceanside.com for more information on commercial mold damage.
Commercial Fire Sprinkler Maintenance
A fire starts at your commercial property in South Oceanside, CA and you have been vigilant about regular sprinkler maintenance. A flood of relief washes over you, as you watch the fire sprinklers turn on and douse the flames. When properly cared for, such systems reduce property loss by 70 percent and life loss by 80 percent.
How to Maintain Fire Sprinklers
Monitor the status of your building’s sprinkler system through preventative maintenance. Be aware of the standards set forth by the National Fire Protection Association (NFPA), especially NFPA 25 which references sprinkler systems. Follow these steps to decrease the likelihood of a system malfunction:
• Inspect the system to confirm that there is no physical damage present. Make sure the valves are open and in good condition. Check the pipes for leaks and verify adequate system pressure.
• Maintain the individual components, such as lubricating the valves and removing any debris.
• Test the system to confirm it is in working order.
What to Do After Accidental Activation
Sometimes, regardless of adequate sprinkler maintenance, an error occurs. If the system accidentally goes off, take the following actions to reduce water damage:
• Turn off the water supply to the sprinkler system. As a safety precaution, turn off the main electricity to the building first.
• Open windows to ventilate the area and increase air flow.
• Call a water restoration specialist as soon as possible. The sooner the experts arrive, the faster your property is assessed, dried, cleaned and restored to preloss condition.
• Contact your commercial property insurance agent. Most losses from water damage are covered as a part of your policy.
When working correctly, fire sprinklers can save property and lives. As a business owner in South Oceanside, CA conducting regular sprinkler maintenance is crucial to protecting your livelihood. If an accidental activation occurs, contact a water restoration company as soon as possible to reduce further water damage and restore your property.
Visit http://www.SERVPROfallbrooksouthoceanside.com for more information on commercial water damage.
How To Clean Out a Fire-Damaged Computer Safely
Give SERVPRO a call after commercial fire damage.
An electrical fire can be incredibly hazardous, particularly when it involves fire-damaged electronics such as computers. If a fire doesn’t completely torch your device, the smoke and soot can damage the insides of your computer, rendering it unusable. Residual soot from the fire contains metal-corroding acids that can cause the device to malfunction. These acidic particles stick to the fan blades, circuit boards, and other essential components. Even if these materials are removed, any dust that accumulates in your computer can get sucked into the chemicals, making cleanup an arduous task.
Following Important Steps
To salvage their fire-damaged computers, residents of South Oceanside, CA are taking these critical steps:
1. Turn off your computer and unplug any external devices, such as your keyboard, mouse, printers, speakers, and monitor.
2. Carefully open your computer to remove any potentially damaged hardware. If in doubt, follow the instruction manual for your device on how to proceed safely.
3. Before cleaning, make sure your hands and face are covered with gloves and a dust mask. Soot from an electrical fire can be hazardous to your respiratory system.
4. Use a can of compressed air to meticulously blow dust out of the inside of your computer. Spray surfaces at a moderate distance and shoot short bursts of air, as opposed to a sustained stream. This prevents the cold compressed air from causing parts to frost over.
Putting Your Computer Back Together
Once the computer parts are thoroughly cleaned, it should be safe to place them in their proper locations. Turn the computer on. If your computer still isn’t working, it may be too late for repairs.
The clock is ticking, and the longer you wait the smaller the window becomes for you to conduct an effective computer cleanup. If you are still apprehensive about handling the situation yourself, contact a fire-damage restoration specialist to guide you through the process. No job is too big for trained professionals experienced in saving your precious valuables from electrical fire damage. Visit http://www.SERVPROfallbrooksouthoceanside.com for more information on commercial fire damage.
Know When It’s Time To Call a Restoration Company
Water damage in a residential property.
Whether dealing with a broken pipe, a sewage backup or a natural flood, it’s important to know when it’s time to call your Fallbrook, CA water restoration team. Water damage can get out of hand quickly, and even if you perform pipe burst cleanup measures immediately, it can still result in mold growth and structural damage. For this reason, you should at least allow a remediation team to inspect your building post-flood to make sure all is clear. Instances in which you should always call a remediation team include the following:
• When you’ve experienced an obvious disaster, such as a major flooding or a sewage backup
• When you notice a wall or ceiling bloated with water
• When you notice water dripping from the electrical
• When your floorboards are bowing
• When you smell mold
When in Doubt, Call in Help
If you discover a leak beneath your breakroom kitchen sink that you know was not there the day before, you may be able to fix the pipe and clean up the mess yourself. However, because you have more than just yourself to worry about, any other water damage should be a reason to call for help. A trained sewer cleanup company can dry out the damaged area and perform thorough pipe burst cleanup measures. Even if damage has already occurred, they can prevent further and more costly destruction and help you prepare the necessary statements and paperwork for your insurance company.
Prevention Is Key
You and other building occupants can help prevent significant water damage by keeping a close eye out for signs of moisture issues. These include peeling paint, wall discoloration, bubbling paint, cracking or crumbling drywall, and a musty or moldy smell. Your floor may also show signs of water damage in the form of bowing floor boards.
If you spot moisture damage in your building and don’t know how long it’s been there, call a Fallbrook, CA water remediation team. They can help with pipe burst cleanup, mold remediation and more. Visit http://www.SERVPROfallbrooksouthoceanside.com for more information on commercial water damage.
3 Steps for Recovering From Commercial Storm Damage
When your knee deep in water, call the experts at SERVPRO of Fallbrook / South Oceanside.
Unsure of what to do if your business is affected by flooding or water damage? From water extraction to the tear out of wet materials, taking immediate action is imperative for lessening the damage that a commercial property suffers. Whether the building needs immediate storm restoration or you want to be prepared in the case of an unexpected emergency, knowing the procedure can help get your business back up and running after a water disaster.
1. Removing the Water
Before affected areas can be completely cleaned or repaired, standing water must be extracted. Depending on the size of the flooded area, mopping up excess liquid may be sufficient. Larger disasters may require the use of a wet vacuum system or pump to clear out the mess.
2. Beginning the Process of Drying Out
Drying out commercial spaces that have suffered water damage is imperative for squashing the growth and spread of mold and bacteria. The longer that interior areas are left to dry on their own, the more severe damage can become, and repairs can grow more costly. The most important aspect in drying up sodden spaces is getting the air moving. This can be achieved through opening doors and windows to circulate the air naturally, as long as the humidity isn’t too high. Air can be forcefully moved with the aid of fans.
3. Restoring Your Commercial Property
Getting a storm-damaged building back into working order may require the tear out and replacement of some structures within the property. Sometimes this entails the removal of a small section of drywall, while in more severe instances, large flooring space or an entire wall may need to go due to major saturation or contamination. Flooded floors often require the replacing of carpet, and sometimes hardwood may also become too damaged to salvage.
Recovering from water damage can feel overwhelming. A water remediation professional in South Oceanside, CA can offer assistance and peace of mind. Whether your commercial space requires water removal and drying or the tear out of structures, following the necessary procedures and precautions make recovery possible.
Visit http://www.SERVPROfallbrooksouthoceanside.com for more information on commercial storm damage.
How to Handle Water Cleanup After a Fire
After the event of a fire, you may think that the fire cleanup is all you need to worry about. However, firefighters must battle the flames with water, so although they are extinguishing the fire, they are also creating the need for water cleanup.
Professionals in South Oceanside, CA should be contacted quickly to help deal with both types of damage. Here are three things you can do to help:
1. Appraise the Damage
A fire in a company’s building can be devastating because of the destruction of the workspace and equipment. It’s important for you to contact your insurance company so that you can recover as much of the cost as possible. Assess the situation and determine the damage that was done. The fire may have destroyed many things, but anything such as equipment, floors, and walls could merely be soggy. Make sure to document anything that was damaged so that you can recover most of the cost.
2. Ventilate the Building
After assessing the damage, it’s wise to get started on the restoration process. Be sure to check with officials before reentering the building, because there might be some safety issues. Once you have been given the all clear, go ahead and start creating some airflow. This can help with smoke cleanup, as the ventilation will clear the air.
3. Thoroughly Clean Salvageable Items
Although drying out items is an important part of water cleanup, it’s also vital to thoroughly clean everything you can to prevent mold and other issues. Fire restorers can bring in specialized equipment to help with the process. Help the professionals by offering any information or aid needed.
Once most of the ventilation and cleaning has begun, the restoration company may focus on renovating walls and floors that have become unsafe from all the damage. Once this is complete, you can look forward to opening your business once more. Visit http://www.SERVPROfallbrooksouthoceanside.com for more information on commercial fire damage.
How a Commercial Fire Damage Company Will Restore Your Building
How a Commercial Fire Damage Company Will Restore Your Building
If your office or commercial building had an electrical fire or a utility room fire, you need to call a professional fire restoration company. Soot damage and smoke damage are common. These will give your building a horrible odor that can linger for a long time. You may even have blackened or charred walls and ceilings. The firefighters may have broken holes in your walls. Firefighters sometimes do this in order to make sure that the fire is not burning in between the two sides of the wall. Firefighters may shatter windows in order to spray water on the inside of the room from the fire truck’s fire hose. Holes may also be caused by the fire itself. Commercial fire damage comes in other forms as well. For example, your home may become flooded when the firefighters put out the fire using the fire truck’s fire hose. Your building can also get flooded when the fire suppression and fire sprinkler system goes off.
Make an emergency call to a fire restoration company. A fire restoration company will usually arrive as soon as possible to take care of the commercial fire damage. You should not enter your building before you call them, because there may be hazards, such as broken glass.
A fire restoration company will take a look at your building in order to find out how much damage was caused. They will look for the cause of the fire and find out whether it was an electrical fire or a utility room fire. They will plan a strategy for the restoration and renovation of your building.
First, the commercial fire damage company will take care of the water in your building. The fire damage service will use flood pumps to pump out the water in your building that was spread by the fire truck’s fire hose or by the fire suppression and fire sprinkler system. They will remove any excess moisture from your building and will make sure your home is completely dry. Before they do this step, the restoration company will likely board up any holes or broken windows. The reason this might be done before the water is removed is so that further water does not enter the building when it rains in addition to the water that is there because of the fire truck's fire hose. Wooden boards or tarps can be used to board up your building.
The next step is dealing with the soot damage and the smoke damage. The commercial fire damage company will clean up your walls and furniture from ashes and soot. The fire damage company will remove any bad odors that may be lingering in your building, a common form of soot damage and smoke damage. Only professionals have the equipment to deal with soot damage and smoke damage.
The fire damage company will then start repairing the structure of your building. They will start removing burnt parts of your walls and ceiling. The fire damage company will replace certain boards and beams. They will make sure that your ceiling is firm and strong, and they will do the same for your floor. They will repaint your building so that everything looks beautiful again.
Before they leave, the fire restoration company will explain the cause of the electrical fire or the utility room fire. They will give you advice on how to prevent another electrical fire or utility room fire. They will make sure that your fire suppression and fire sprinkler system works. They will also explain how to maintain your fire suppression and fire sprinkler system.
Visit http://www.SERVPROfallbrooksouthoceanside.com for more information on commercial fire damage.
The Benefits of Securing Commercial Fire Damage Restoration Services in Oceanside / Fallbrook
No matter how large or small, SERVPRO is Faster to Any Size Fire or Water Disaster.
In Oceanside / Fallbrook, Commercial Fire Damage Restoration is Completed by SERVPRO of Fallbrook / South Oceanside
No business owner in Oceanside / Fallbrook wants his property to go through a commercial fire damaging event. Fires are never on a day's agenda, but by following a preventative plan you may avoid an incendiary occurrence at your place of business. But if your commercial property is adversely impacted by fire, it is now part of your agenda. The priorities of limiting damages and minimizing out-of-pocket-expenses for the restoration services are of the utmost importance. Hiring a team of uniformed, trained technicians from SERVPRO of Fallbrook / South Oceanside can offer effective, expedient commercial fire damage restoration services. Protecting your asset is our number one priority.
Professionals Have Industry Experience
The extent of the commercial fire damage and the type of business or service determines our restoration and cleaning steps. Assessing visible fire damage and pre-testing damaged items are critical first steps. Our fire damage restoration specialists have been trained according to IICRC guidelines. And with additional in-house and corporate courses we surpass the industry standards for commercial fire damage restoration. Though each fire is unique, SERVPRO of Fallbrook / South Oceanside follows a protocol that goes from assessment, water removal (if applicable) and drying, cleanup, content restoration, to mold remediation. Deodorizing smoke odor and removing its source will return the air quality to pre-fire levels. A final walk through with you, to guarantee your satisfaction with our service, is the final step.
SERVPRO of Fallbrook / South Oceanside Use Specialized Equipment
Industrial grade equipment is needed in conjunction with properly trained and experienced technicians for fast and efficient commercial fire damage restoration. We can utilize truck-mounted water pumps and portable wet-vacs for the water extraction. The drying continues with air movers (high-velocity fans) and dehumidifiers--both refrigerant and chemical models. Cleaning with the use of special sponges, products, and chemicals according to the IICRC guidelines continues the fire damage restoration process. We can ship to our cleaning facility furniture, electronics and business machine. We even offer document drying to save business paperwork. Portable foggers, low and high volume models, remove odors and their sources. We complete commercial fire damaged service with your walk through.
Let The Professionals Of SERVPRO of Fallbrook / South Oceanside Assist You Immediately
As a business committed to offering cutting edge commercial fire damage restoration services in: Oceanside, Fallbrook, Bonsall, Vista, and North County San Diego. SERVPRO of Fallbrook / South Oceanside offers fast solutions from friendly people. To expedite the initial service, thus limiting costs and "closed for repairs," we will prepare an estimate that complies with insurance industry standard guidelines. We cooperate and coordinate with insurance adjusters, upon request. This will accelerate the claim's resolution. We offer 24/7 emergency services and also recognize how anxiety-inducing a fire can be. SERVPRO of Fallbrook / South Oceanside will get you back in business "Like it never even happened."
Locally Owned Company with National Resources
SERVPRO of Fallbrook / South Oceanside can respond immediately to your commercial fire damage emergency regardless of the scope or size of the damage. We are part of a national network of over 1,650 Franchises with special Disaster Recovery Teams placed strategically throughout the country. We are faster to any size disaster.
We are proud to service our neighbors in Fallbrook, Oceanside, Vista, Rainbow, Bonsall, Camp Pendelton and San Diego North County with 24/7 emergency availability for water and fire / smoke damage and mold remediation.
See our great YELP reviews! Customer Satisfaction is our priority!
SERVPRO of Fallbrook / South Oceanside. We Answer the Phone Ready to Help?Call Today : 760-451-0600